[ Pobierz całość w formacie PDF ]

- and  volume + at the local control panel. The NVM menu appears on the screen. Select with the
buttons  n / o on the remote control the parameter  NVM addr. The NVM menu appears on the
screen.
The settings can be selected with the red ( picture menu ) button on the remote control and
changed with buttons  volume + and  volume - . Each changing of an address has to be stored
separately with the button  OK on the remote control. After the changing of the addresses leave
the service mode with the button  TV . To activate the modification switch off the set with the
main power switch and start it again.
Attention: The changing of other addresses can effect further failure!
Modifications reserved !
Silvastraße 1
D-86842 TÜRKHEIM
Date: 06.12.00
Service - Info
Part : Feature-Box TV 17
Concern: Distinguishing mark between Feature-Box version 1 and version 2
_______________________________________________________________________________________________
1. Feature-Box version 1:
2. Feature-Box version 2:
For information:
" The main recognisable distinguishing mark between the feature box versions is the number of
the integrated IC s ( version 1: four pieces / version 2: three pieces).
" In case that the feature box version 2 is integrated the software version X 4.5x or Y 4.5x has to
be used.
" Each TV 17 board have got an identification sticker ( see below sketch ). In case of an
integrated feature box version 2 the chassis identification number starts with the figures 
011...  .
IIIIIIIIIIIIIIIIIIIIIIIIIII
22391219
0110090.001 TV17.x Mu/VSS-23
Ã
Identifications number
Modifications reserved! Service-Info 270
Info number: 255 date: 13.03.00
Service information !
Concern: Sets in connection with the cabinet
type 70241
º Jamming pusch button of the main
power main power switch
» Stby LED without function
Schneider Electronics AG
Silvastraße 1 for checkback::
86842 Türkheim / Germany TV-Hotline: 0049 8245-51 108
Spare part department: 0049 8245-51 71
º To avoid the jamming of the push button, the plastic rip at the left side,
below the push button aperture has to be removed alike sketch 1.
Sketch 1: front side cabinet inside view
» The soldering pin of the jumper  J38 may damaged by a plastic rip
(sketch.2). As a result of this the stand-by LED is without function. To
avoid this the left plastic rip below the pusch button aperture has to be
removed alike sketch 1.
Sketch 2: Layout TV 17
Modification reserved!
 Schneider AG DUAL GmbH
Silvastraße 1
D-86842 TÜRKHEIM
Date : 11.02.00
Service - Info
Unit type : Chassis TV 17.1
Concern part no.: : 0101591.2
KD0002K No.: 250
Concern: Timerfunction not available.
Remedy: If the timerfunction don´t switch off the set despite all data`s are duly entered, the NVM
Address  0FD7 has to be set to data  00 according the following instruction.
Service-Mode:
Simultaneously press and then release the red and blue button on the remote control. Simultaneously press
and then release within five seconds the buttons  program - and  volume+ at the local control panel. The
main service menue appears on the screen:
Versionsnummer X X.XX
NVM - Reset Aus
TV - Type 4 : 3
MSP - Type BG
Funktionstasten 4
KISI - Suchlauf Ein
VGA - Modus Aus
Testmode- Daten Aus
VPS/PDC - Anzeige Aus
Testbild Aus
auto. Formatumschaltung Ein
Front AV Aus
OK.. save TV.. leave menue
Select with the buttons  n / o on the remote control the parameter  NVM addr. . The NVM menue appears
on the screen:
4 : 3
NVM addr. 0000 data 255
OK . . save TV . . leave menue
The settings can be selected with the red button on the remote control and changed with the buttons volume
+/- on the remote control. Each changing of an address has to be stored separately with the button  OK
on the remote control. After the changing of the addresses leave the service mode with the button  TV on
the remote control. To activate the changing, switch off the TV with the main power switch and start it again.
Attention: The changing of other addresses can effect further failure!
Modifications reserved! [ Pobierz całość w formacie PDF ]